|
General Description
The LT2000-SP Laser Distance Meter operates over a
substantial range off static or passing product in difficult areas in
harsh environments. The LT2000-SP measures distances over a working
range up to 30 meters off of natural surfaces, up to 100 meters off of
white surfaces and up to 150 meters off of a special reflector. For
operation with automated positioning control of material handling
transport systems a white reflective target is used or the special
reflector is used.
Especially suited for precise detection and measurement of cold/hot
product at temperatures up to 600°C. For higher product temperature a
Model LT2000-HT is available for measurement of cold/hot product at
product temperatures up to 1200°C (2192°F) .
Straightforward alignment is easily accomplished via the visible red
laser measuring beam.
Accuracy is +/- 2mm to +/- 5mm according to
ambient temperature and surface reflectivity. Repeatability is +/- 0.5mm
and the user scalable resolution is 0.1mm.
The zero offset and the span of the 4 - 20mA analog output are both user
programmable. The distance offset is also user programmable, this allows
the user to define a zero point independent of the analog output zero
offset.
Provided with a user programmable digital switching output which is
triggered by exceeding in the positive or negative direction a user
programmable distance threshold. The hysteresis of the digital switching
output is also programmable.
The LT2000-SP is a robust Laser Distance
Meter and is provided in a NEMA 4 - IP65 fiber reinforced polyester
weather resistant corrosion proof enclosure. Standard operating temperature range 50°C.
The LT2000-SP Laser Distance Meter provides a highly accurate
measurement reading. It is ideal for length, thickness, depth and height
position determination.
Supplied as standard with a switch selectable RS232 & RS422 serial
interface with a 2400 to 38,400 Baud Rate & a programmable 4 - 20mA 16
BIT analog output. An optional ProfiBus DP Gateway Interface Box is
available. ProfiBus DP, DeviceNet and Ethernet Interface Options will
soon be available.
|
